KEBEC II 100" or 120"


KEBEC.GIF (61136 octets)
100" 1003-0000
120" 1004-0000
168" 1005-0000
Kebec II is a strongly built 4 shaft counter-balance loom, allowing the production of wide fabrics.It is operated by two weavers, each one working with his own set of treadles, and throwing or receiving the shuttle in turn .With the flying shuttle beater, it can also be operated by one person.The loom is provided with floating lams; neither end of the lams are affixed to the loom frame. This makes the threading easier. It is always equipped with treadle sets fixed in front. Whichever treadle is used, the tension remains the same and the shed is perfect from one end to the other.
» Steel reed, 12 dents/inch (5dents/cm) » 2 metal lease sticks
» 2 sets of 6 treadles » 2 warp rods
» Wire heddles, 12½" » 2 aprons
» 2 boat shuttle 15¼" (6122-2000) » 2 cords
» 1 doz. plastic bobbins 6133-8000 » Book: "Warp and Weave"
» 1 reed & heddle hook 6141-7000 » Assembly instructions
SPECIFICATION & DIMENTIONS
Weaving Width 100" (250 cm) 120" (300 cm)
Number of Heddles 2500 3000
Loom Width 112" (285 cm) 132" (336 cm)
Depth 49" (125 cm) 49" (125 cm)
Front Height 34" (86 cm) 34" (86 cm)
Total Height 63" (160 cm) 63" (160 cm)
Net Weight 300 pds (136 Kg) 350 pds (159 kg)
OPTIONS
  100" 120"
Loom with inserted eye heddles 1003-9800 1004-9800 $
Bench open end 6384-4000 6384-4000
Sectional warp beam 1" section 6441-7000 6441.8000
Sectional warp beam 2" section 6442-7000 6442-8000
Flying shuttle beater 6471-7000 6471-8000